Select Display Mode; Alarm Function - Silvercrest SWEP 500 A1 Operating Instructions Manual

Select display mode

You can select which information is shown on the screen when the radio is
switched off.
The selected mode is indicated by a corresponding symbol on the screen.
When the radio is switched off, select the display mode by repeatedly
FINE
pressing the
Symbol on the screen display mode
CLOCK
CITY
DATE
CITY DATE

Alarm function

This multi-band radio provides you with two independently adjustable
alarm times, AL1 and AL2. You can programme for both...
...if the device should sound an alarm on every workday, at the
weekend, the whole week or on a single specific weekday;
...if the alarm should sound with an alarm tone or with the radio.
button in accordance with the following table:
only the time is displayed
the time and world time are shown in succession
the time and date are shown in succession
the time, date and world time are shown in succession
- 19 -
GB/CY