Select Display Mode; Alarm Function - Silvercrest SWEP 500 A1 Operating Instructions Manual

GB/CY
Set snooze time
• Press the
pears on the display (factory default SNO 10).
UP
• Use the
1 and 59 minutes.
Setting 12/24 hour mode
MODE
• Press
24-hour mode.
• Press the
• Press the
12 HR is displayed on the screen. In the afternoon in addition PM is shown
on the screen.

Select display mode

You can select which information is shown on the screen when the radio is
switched off.
The selected mode is indicated by a corresponding symbol on the screen.
When the radio is switched off, select the display mode by repeatedly
FINE
pressing the
Symbol on the screen display mode
CLOCK
CITY
DATE
CITY DATE

Alarm function

This multi-band radio provides you with two independently adjustable
alarm times, AL1 and AL2. You can programme for both...
...if the device should sound an alarm on every workday, at the
weekend, the whole week or on a single specific weekday;
...if the alarm should sound with an alarm tone or with the radio.
MODE
button seven times. The currently set snooze period ap-
DOWN
and buttons to set the snooze time to a time between
eight times. The screen shows the 24 HR message for
UP
button to set the 24 hour mode.
DOWN
button to set the 12 hour mode.
button in accordance with the following table:
only the time is displayed
the time and world time are shown in succession
the time and date are shown in succession
the time, date and world time are shown in succession
- 18 -