General Functions; Time Functions - Silvercrest SWEP 500 A1 Operating Instructions Manual

GB/CY

General functions

Key lock
In order to prevent changing the settings unintentionally by touching the
buttons, you can activate the key lock.
• With the radio switched on, press and hold the button
the indicator on the display
SNOOZE
tons
• Press and hold the
disappears.
Screen lighting
• Press any button to illuminate the screen. The screen will remain lit for
about 10 seconds.
• When the key lock is activated, it is not possible to switch on the dis-
play illumination.
Stand
• Fold out the base on the rear of the device to make the device
more stable.

Time functions

When the power provision is established (mains or battery operation) the
time indicated by the world receiver begins at "0:00 00" Proceed with set-
tings the date and time, as explained in the following sections.
The time functions can only be programmed when the radio is switched off.
If the device is disconnected from mains power or the batteries are remo-
ved, the settings are lost.
MEM
and , are now blocked.
MEM
button again until the indicator in the display
flashes. All buttons, except the but-
- 12 -
MEM
button until