Pppoe Intermediate-Agent Format-Type (Global) - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

pppoe intermediate-agent format-type (global)

To set the access node identifier, generic error message, and identifier string for the switch, use the
pppoe intermediate-agent format-type (global) command. To disable the feature, use the no form of
this command:
Syntax Description
access-node-identifier
string string
generic-error-message
string string
identifier-string string
string
option {sp|sv|pv|spv}
delimiter {,|.|;|/|#}
Defaults
access-node-identifier has a default value of 0.0.0.0.
generic-error-message, identifier-string, option, and delimiter have no default values.
Command Modes Global configuration mode
Command History Release
12.2(50)SG
Usage Guidelines
Use the access-node-identifier and identifier-string commands to enable the switch to generate the
circuit-id parameters automatically.
The no form of identifier-string command unsets the option and delimiter.
OL-25342 -01
pppoe intermediate-agent format-type access-node-identifier string string
pppoe intermediate-agent format-type generic-error-message string string
pppoe intermediate-agent format-type identifier-string string string option {sp|sv|pv|spv}
delimiter {,|.|;|/|#}
no pppoe intermediate-agent format-type {access-node-identifier | generic-error-message |
identifier-string}
ASCII string literal value for the access-node-identifier.
ASCII string literal value for the generic-error-message.
ASCII string literal value for the identifier-string.
Options:
Delimiter between slot/port/VLAN portions of option.
Modification
Support for this command was introduced on the Catalyst 4500 series
switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
sp = slot + port
sv = slot + VLAN
pv = port + VLAN
spv = slot + port + VLAN
pppoe intermediate-agent format-type (global)
2-527