Pppoe Intermediate-Agent Vendor-Tag Strip - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

pppoe intermediate-agent vendor-tag strip

This command takes effect only if you enable the pppoe intermediate-agent interface configuration
Note
command and the pppoe intermediate-agent trust command.
To enable vendor-tag stripping on PPPoE Discovery packets from PPPoE Server (or BRAS), use the
pppoe intermediate-agent vendor-tag strip command. To disable this setting, use the no form of this
command.
Syntax Description
This command has no arguments or keywords.
Defaults
vendor-tag stripping is turned off.
Command Modes
Interface configuration mode
Command History Release
12.2(50)SG
Usage Guidelines
This command has no effect on untrusted interfaces.
Use this command on a PPPoE Intermediate Agent trusted interface to strip off the vendor-specific tags
in PPPoE Discovery packets that arrive downstream from the PPPoE Server (or BRAS), if any.
Examples
This example shows how to set vendor-tag stripping on an interface:
Switch(config-if)# pppoe intermediate-agent vendor-tag strip
This example shows how to disable vendor-tag stripping on an interface:
Switch(config-if)# no pppoe intermediate-agent vendor-tag strip
Related Commands Command
pppoe intermediate-agent
(interface)
pppoe intermediate-agent
trust
OL-25342 -01
pppoe intermediate-agent vendor-tag strip
no pppoe intermediate-agent vendor-tag strip
Modification
Support for this command was introduced on the Catalyst 4500 series
switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
Description
Enables the PPPoE Intermediate Agent feature on an interface.
Sets the trust configuration of an interface.
pppoe intermediate-agent vendor-tag strip
2-533