Show Vmps - Cisco Catalyst 4500 Series Command Reference Manual

show vmps

show vmps
To display the VLAN Query Protocol (VQP) version, reconfirmation interval, retry count, VLAN
Membership Policy Server (VMPS) IP addresses, current servers, and primary servers, use the show
vmps command.
Syntax Description statistics
Defaults
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History Release
12.1(13)EW
Examples
This is an example of output from the show vmps command:
Switch# show vmps
VQP Client Status:
--------------------
VMPS VQP Version:
Reconfirm Interval: 60 min
Server Retry Count: 3
VMPS domain server: 172.20.50.120 (primary, current)
Reconfirmation status
---------------------
VMPS Action:
Switch#
This is an example of output from the show vmps statistics command:
Switch# show vmps statistics
VMPS Client Statistics
----------------------
VQP
VQP
VMPS Changes:
VQP
VQP
VQP
VQP
VQP
Switch#
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-918
show vmps [statistics]
(Optional) Displays the client-side statistics.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
1
No Dynamic Port
Queries:
Responses:
Shutdowns:
Denied:
Wrong Domain:
Wrong Version:
Insufficient Resource: 0
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
0
0
0
0
0
0
0
OL-25342 -01