Source (Netflow-Lite Exporter Submode) - Cisco Catalyst 4500 Series Command Reference Manual

Cisco ios command reference
Hide thumbs Also See for Catalyst 4500 Series:
Table of Contents

Advertisement

source (netflow-lite exporter submode)

source (netflow-lite exporter submode)
NetFlow-lite is only supported on the Catalyst 4948E and Catalyst 4948E-F Ethernet switches.
Note
To specify a source Layer 3 interface of the NetFlow-lite collector, use the source command. To delete
a source address, use the no form of this command.
Syntax Description
source-address
Defaults
None
Command Modes
netflow-lite exporter submode
Command History
Release
15.0(2)SG
Usage Guidelines
One of the mandatory parameters for a minimally configured exporter along with the destination address
and the UDP destination port of the collector.
Examples
This example shows how to specify a source Layer 3 interface of the NetFlow-lite collector:
Switch# config terminal
Switch(config)# netflow-lite exporter exporter1
Switch(config-netflow-lite-exporter)# destination 5.5.5.6
Switch(config-netflow-lite-exporter)# source 5.5.5.5
Switch(config-netflow-lite-exporter)# transport udp 8188
Switch(config-netflow-lite-exporter)# ttl 128
Switch(config-netflow-lite-exporter)# cos 7
Switch(config-netflow-lite-exporter)# dscp 32
Switch(config-netflow-lite-exporter)# template data timeout 1
Switch(config-netflow-lite-exporter)# options sampler-table timeout 1
Switch(config-netflow-lite-exporter)# options interface-table timeout 1
Switch(config-netflow-lite-exporter)# export-protocol netflow-v9
Switch(config-netflow-lite-exporter)# exit
Switch(config)#
Display the exporter
Switch# show netflow-lite exporter exporter1
Netflow-lite
Network Protocol Configuration:
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-932
source source-address
no source source-address
Specifies a source Layer 3 interface for a NetFlow-lite exporter.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Exporter exporter1:
Destination IP address:
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
5.5.5.6
OL-25342 -01

Advertisement

Table of Contents
loading

Table of Contents