Installation Support; Legal Disclaimer; Preparation; Checks - Motorola PTP 500 Series User Manual

6.1

Installation Support

Online installation support and contact details for your regional support can be found at
http://www.motorola.com/ptp
A Frequently Asked Questions (FAQ) section can be found in Section 17 "FAQs".
6.2

Legal Disclaimer

IN NO EVENT SHALL MOTOROLA, INC. BE LIABLE FOR ANY INJURY TO ANY PERSONS
OR ANY DAMAGE CAUSED DURING THE INSTALLATION OF THE MOTOROLA PTP 500
SERIES PRODUCT.
6.3

Preparation

6.3.1 Checks

Before proceeding with the installation, perform the following checks:
•
Ensure that you have planned the link, as described in Section 4 "Planning
Considerations".
•
Check the contents of all packages against the parts lists shown in the packing list.
•
Ensure that you are qualified to undertake the work.
•
Ensure that you have taken the correct safety precautions.

6.3.2 Tools Required

The following specific tools are required to install a PTP 500 Series Bridge, in addition to
general tools:
•
13mm wrench and 22 mm wrench for use with the glands
•
RJ45 crimp tool (it must be the correct tool for the type of RJ45 being used)
•
Personal Computer (PC) with 100BaseT Ethernet
•
Either Internet Explorer version 6 or higher, or FireFox 2.0 or higher are recommended.
•
Ethernet patch cables
•
Motorola PTP LINKPlanner report for this link
48
6 Installation