Table 12 - Ptp 500 Series Bridge Factory Configuration Values - Motorola PTP 500 Series User Manual

Table 12 – PTP 500 Series Bridge Factory Configuration Values
Example PTP 500 Series Configuration Data
For your convenience these two units have been pre-configured as linked Units.
Units:
ODU serial number
0167100000A0
Ethernet MAC address
00:04:56:10:00:96
Configured as:
Master
Target MAC address
00:04:56:20:00:05
License Key
9eb8-c807-396c-7c3f-2819-393e-1f48-e46f
IP Address
169.254.1.2
CAUTION
The factory default configuration is set to Region 26. Region 26 allows the PTP 500
Series bridge a maximum transmit power of 27 dBm. If the local regulatory regime
limits the maximum transmit power (EIRP) to less than 27 dBm you should obtain a
new license key containing the correct region code from your local distributor or direct
from Motorola.
transmit power by following the procedures in Section 7.7.2 'Manually Configuring
The Wireless Units'.
ODU serial number
016710000096
Ethernet MAC address
00:04:56:10:00:A0
Slave
Target MAC address
00:04:56:20:00:0D
License Key
c49a-e2ac-9ca7-3925-e4e2-a8cc-120d-2f5e
IP Address
169.254.1.1
Alternatively in the short term, you should reduce the maximum
105
7 Web Page Reference