Return The Value Of The Last Updated S-Register; F, Set To Factory Defined Configuration; F Parameters - Motorola AT Commands G24-L Developer's Manual

Modem Configuration and Profile

?, Return the Value of the Last Updated S-register

This command displays the most recently updated value stored in an S-register.
Command Type
Read
Example
AT?
000
OK
AT?
003
OK
ATS36=5
OK
AT?
005
OK
&F, Set to Factory Defined Configuration
This command restores the factory default configuration profile. The G24-L only supports one
factory default profile, 0.
Command Type
Set
Read
Test
The following table shows the &F parameters.
<Parameter>
<value>
3-198
Syntax Response/Action
AT? 000
OK
Syntax Response/Action
AT&F<value> OK
or:
+CMS ERROR: <err>
AT&F? <current profile
number>
Table 3-133: &F Parameters
0 Factory default configuration profile. This is the only value supported.
G24-L AT Commands Reference Manual
Remarks
The Read command returns the value
of the last updated S-register.
Remarks
The Test command for &F is not
defined by ITU, and therefore is not
supported by the G24-L. The G24-L
returns an error.
Description
April 15, 2008