Motorola AT Commands G24-L Developer's Manual page 418

AT Commands Alphabetical Summary
N
O
P
Q
RING
S102
S24
S94
S96
Sn
T
V
A-16
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This command is supported for
backward compatibility only, and
has no effect.
This command returns a phone to
the Online Data mode and issues
a CONNECT or CONNECT
<text> result code.
This command is supported for
backward compatibility only, and
has no effect.
This command determines
whether to output/suppress the
result codes.
This unsolicited event is received
when an incoming call (voice,
data or fax) is indicated by the
cellular network.
This S-register sets the value of
the delay before sending the data
to the terminal.
This S-parameter
activates/disables the Sleep
mode. If the parameter value is
greater than 0, it represent the
number of seconds till the G24-L
enters sleep mode.
This S-parameter represents the
Boolean status, On/Off, of the
sidetone feature.
This S-parameter represents the
Boolean status, On/Off, of the
echo cancelling feature in the
handsfree.
This command reads/writes
values of the S-registers, and
includes registers 1-49.
This command is supported for
backward compatibility only, and
has no effect.
This command determines the
response format of the data
adapter and the contents of the
header and trailer transmitted
with the result codes and
information responses.
G24-L AT Commands Reference Manual
Description
Page 3-304
Page 3-33
Page 3-304
Page 3-191
Page 3-17
Page 3-203
Page 3-202
Page 3-161
Page 3-162
Page 3-194
Page 3-304
Page 3-190
Page
April 15, 2008