Motorola AT Commands G24-L Developer's Manual page 414

AT Commands Alphabetical Summary
+MIPCALL
+MIPCFF
+MIPCLOSE
+MIPCONF
+MIPFLUSH
+MIPODM
+MIPOPEN
+MIPPUSH
+MIPRTCP
+MIPRUDP
+MIPSEND
+MIPSETS
A-12
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This command creates a wireless
PPP connection with the GGSN,
and returns a valid dynamic IP
for the G24-L.
This command sets the Filtering
List.
This command causes the G24-L
to free the socket accumulating
buffer and disconnect the G24-L
from a remote side.
Configure Internal TCP/IP stack.
This command causes the G24-L
to flush (delete) data accumulated
in its accumulating buffers.
This command causes the G24-L
to initialize a new socket in
Online Data Mode and open a
connection with a remote side.
This command causes the G24-L
to initialize a new socket and
open a connection with a remote
side.
This command causes the G24-L
to push the data accumulated in
its accumulating buffers into the
protocol stack.
This unsolicited event is sent to
the terminal when data is
received from the TCP protocol
stack.
This unsolicited event is sent to
the terminal when data is
received from the UDP protocol
stack.
This command causes the G24-L
to transmit the data that the
terminal provides, using an
existing protocol stack.
This command causes the G24-L
to set a watermark in the
accumulating buffer. When the
watermark is reached, data is
pushed from the accumulating
buffer into the protocol stack.
G24-L AT Commands Reference Manual
Description
Page 3-276
Page 3-301
Page 3-282
Page 3-289
Page 3-286
Page 3-279
Page 3-277
Page 3-285
Page 3-287
Page 3-287
Page 3-284
Page 3-283
Page
April 15, 2008