Cbst Parameters - Motorola AT Commands G24-L Developer's Manual

Call Control
Command
Type
Read
Test
The following table shows the +CBST parameters.
<Parameter>
<speed>
<name>
<ce>
Example
AT+CBST=?
+CBST: (000,004,006,007,014,068,070,071,075),(000-001),(000-003)
OK
AT+CBST?
+CBST: 007,000,001
OK
AT+CBST=6
OK
AT+CBST?
+CBST: 006,000,001
OK
3-32
Syntax Response/Action
AT+CBST? +CBST:
<speed>,<name>,<ce>
OK
AT+CBST=? +CBST: (list of
supported
<speed>s),(list of
supported
<name>s),(list of
supported <ce>s)
OK
Table 3-14: +CBST Parameters
0 - Auto-bauding (automatic selection of the speed; this setting is possible in case of
3.1 kHz modem and non-transparent service)
6 - 4800 bps (V.32)
7 - 9600 bps (V.32)
14 - 14400 bps (V.34)
68 - 2400 bps (V.110 or X.31 flag stuffing)
70 - 4800 bps (V.110 or X.31 flag stuffing)
71 - 9600 bps (V.110 or X.31 flag stuffing)
75 - 14400 bps (V.110 or X.31 flag stuffing)
The default value is 7.
Currently the G24-L supports:
Note:
2 baud rates: 4800 and 9600 bps
2 protocols: V.110 and V.32
0 - Data circuit asynchronous (UDI or 3.1 kHz modem)
1 - Data circuit synchronous (UDI or 3.1 kHz modem)
The default value is 0.
0 - Transparent (Reserved for future implementation)
1 - Non-transparent (default)
G24-L AT Commands Reference Manual
Remarks
The Test command returns values
supported by the MA as compound
values.
Description
April 15, 2008