Calm, Alert Sound Mode; Calm Parameters - Motorola AT Commands G24-L Developer's Manual

OK
AT+MADIGITAL=0
OK
AT+MADIGITAL?
+MADIGITAL: 0
OK
AT+MADIGITAL=3
ERROR
AT+MADIGITAL?
+MADIGITAL: 0
OK

+CALM, Alert Sound Mode

This command handles the selection of the G24-L's alert sound mode. The value of the command
is saved after a power cycle.
Command Type
Set
Read
Test
The following table shows the +CALM parameters.
<Parameter>
<mode>
Note:
Example
AT+CALM=?
+CALM: (0,1)
OK
AT+CALM?
+CALM: 0
OK
AT+CALM=1
OK
April 15, 2008
Syntax
+CALM=<mode>
+CALM?
+CALM=?
Table 3-113: +CALM Parameters
Alert sound mode of the G24-L.
0 Ring (default)
1 Silent mode (ring prevented)
Selecting the ring mode with this command retrieves the current alert volume level
setting.
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
Response/Action
OK The Set command sets the alert sound
mode.
+CME ERROR: <err>
+CALM: <mode> The Read command displays the
current alert sound mode setting.
+CME ERROR: <err>
+CALM: (list of The Test command displays the list of
supported modes.
supported <mode>s)
+CME ERROR: <err>
Description
Remarks
3-171