The following table shows the +CPMS parameters.
<Parameter>
<mem1>
<mem2>
<mem3>
"BM"
"ME"
"MT"
"SM"
+CMGF, Message Format
This command is a basic command. The Set command handles the selection of the message
format used with send, list, read and write commands, as well as the format of unsolicited result
codes resulting from message receipts. The G24-L supports both PDU mode (where entire TP
data units are used) and text mode (where the body of the message and its headers are given as
separate parameters).
Command Type
Set
Read
Test
The following table shows the +CMGF parameters.
<Parameter>
<mode>
April 15, 2008
Table 3-42: +CPMS Parameters
Memory from which messages are read and deleted.
Supported values are: "MT","SM","ME","BM".
The default value at power-up is "MT".
Memory to which writing operation is made.
Supported value is: "ME".
The default value at power-up is "ME".
Memory to which received SMS are stored (unless forwarded directly to TE).
Supported value is: "SM".
The default value at power-up is "SM".
Reserved for future implementation
ME message storage
All storages
SIM message storage
Syntax
Response/Action
+CMGF=<mode>
OK
or:
+CMS ERROR: <err>
+CMGF?
+CMGF:<mode>
+CMGF=?
+CMGF:(list of
supported <mode>s)
Table 3-43: +CMGF Parameters
Message format:
0
PDU mode (default)
1
Text mode
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
Description
Remarks
The Set command sets the message
format to use.
The Read command displays the
current message format.
The Test command lists all the
supported message formats.
Description
3-77