Phone Books And Clock; Directory Access Commands; Cpbs, Select Phone Book Memory - Motorola AT Commands G24-L Developer's Manual

Phone Books and Clock

Phone Books and Clock

Directory Access Commands

This set of commands enables read/write access to the phone book contained within the G24-L,
including both the numeric and the alpha information contained in the location. The presentation
is according to GSM 07.07.
In some cases, it may be possible to use these commands to access the dialed and received call
stacks. However, as these phone books cannot be edited, the +CPBW command does not work on
them.

+CPBS, Select Phone Book Memory

This command handles the selection of the memory to be used for reading and writing entries in
the G24-L's phone books' memory. (When there is a separate storage on the SIM card and in the
G24-L's internal EEPROM).
Command
Type
Set
Read
Test
Note:
3-60
Syntax
AT+CPBS=<storage>
[,<pin2>]
<pin2> is optional
while <storage> =
"FD" only
+CPBS?
+CPBS=?
Read format of +CPBS joins RC and MC, therefore the united list will be prompted.
G24-L AT Commands Reference Manual
Response/Action
OK The Set command selects the phone
book memory storage which is to be
or:
used by other phone book commands.
+CME ERROR: <err>
+CPBS: The Read command returns the
currently selected phone book
<storage>[,<used>,<tot
memory, number of used entries and
al>]
total number of entries in the phone
book memory.
+CPBS: (list of Test command returns the supported
storages as a compound value.
supported <storage>s)
OK
Remarks
April 15, 2008