Audio
The default state is analog.
Figure 3-5: Analog/Digital Switching
General Audio Commands
The following audio commands can be used in both Basic and Advanced audio modes.
General audio commands are: +CRTT, +VTD, +VTS, +CALM, +MMICG, +MADIGITAL.
Basic Audio Setup Commands
+CRSL, Call Ringer Level
This command handles the selection of the incoming call ringer and alert tone (SMS) sound level
on the alert speaker of the G24-L. The new value remains after power cycle.
Command Type
Set
Read
Test
3-158
Power Up
Analog
A T+MA D IGITA L=1
Syntax
Response/Action
+CRSL=<level>
OK
+CME ERROR: <err>
+CRSL?
+CRSL: <level>
+CME ERROR: <err>
+CRSL=?
+CRSL: (list of
supported <level>s)
+CME ERROR: <err>
G24-L AT Commands Reference Manual
A T+MA D IGITA L=0
Digital
The Set command sets the call ringer
level.
The Read command displays the
current ringer alert (SMS) sound level
setting.????????
The Test command displays the list of
supported sound level settings.
Remarks
April 15, 2008