Cgclass, Gprs Mobile Station Class; Cgclass Parameters - Motorola AT Commands G24-L Developer's Manual

+CGCLASS, GPRS Mobile Station Class

This command is used to set the G24-L to operate according to the specified GPRS mobile class.
If the requested class is not supported, an ERROR or +CME ERROR response is returned.
Extended error responses are enabled by the +CMEE command.
Command
Type
Read
Test
Note:
The following table shows the +CGCLASS parameters.
Example
AT+CGCLASS=?
+CGCLASS: (B)
OK
Note:
April 15, 2008
Syntax
AT +CGCLASS?
AT +CGCLASS=?
Issuing GPRS actions over a poor-quality connection may cause protocol errors and harm
data validity. To prevent these problems, G24-L is equipped with a protection mechanism
that confirms GPRS signal strength before issuing GPRS network-related commands.
Table 3-152: +CGCLASS Parameters
<Parameter>
<class>
If a SIM card without GPRS allowance is used:
AT+CGCLASS=?
//Note that CC is a not supported value.
+CGCLASS: (CC)
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
Response/Action
+CGCLASS: <class> The Read command returns the current
GPRS mobile class.
OK
or:
+CME ERROR: <err>
+CGCLASS: (list of The Test command is used for requesting
information on the supported GPRS
supported <class>s)
mobile classes.
OK
or;
+CME ERROR: <err>
Description
String parameter that indicates the GPRS
mobile class:
B Class B
Remarks
3-231