Motorola AT Commands G24-L Developer's Manual page 408

AT Commands Alphabetical Summary
+CLCC
+CLCK
+CLIP
+CLIR
+CLVL
+CMEE
+CMER
+CMGD
+CMGF
+CMGL
+CMGR
+CMGS
+CMGW
+CMSS
A-6
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This command returns a list of all
current G24-L calls and their
statuses, and also
enables/disables the unsolicited
indication of the call list.
This command locks, unlocks or
interrogates a G24-L or a
network facility <fac>.
This command controls the
Calling Line Identity (CLI)
presentation to the terminal when
there is an incoming call.
This command enables/disables
the sending of caller ID
information to the called party,
for an outgoing call.
This command sets the volume of
the internal loudspeaker (which
also affects the key feedback
tone) of the G24-L.
This command enables/disables
the use of result code +CME
ERROR: <err> as an indication
of an error relating to the
functionality of the G24-L.
This command enables an
external accessory to receive key
press information from the G24's
internal keypad.
This command deletes messages
from the G24-L memory.
This command handles the
selection of message formats.
This command displays a list of
SMS messages stored in the
G24-L memory.
This command enables the user
to read selected SMS messages
from the G24-L memory.
This command sends an SM from
the G24-L to the network.
This command writes and saves
messages in the G24-L memory.
This command selects and sends
pre-stored messages from the
message storage.
G24-L AT Commands Reference Manual
Description
Page 3-40
Page 3-184
Page 3-19
Page 3-29
Page 3-159
Page 3-206
Page 3-225
Page 3-108
Page 3-77
Page 3-89
Page 3-94
Page 3-110
Page 3-103
Page 3-101
Page
April 15, 2008