Cnmi Parameters - Motorola AT Commands G24-L Developer's Manual

Command Type
Read
Test
The following table shows the +CNMI parameters.
<Parameter>
<mode>
<mt>
<bm>
<ds>
<bfr>
Example
AT+CNMI=?
+CNMI: (0,3),(0-2),(0,2),(0-2),(0)
OK
AT+CNMI?
+CNMI: 0,0,0,0
OK
AT+CNMI=3,1
OK
AT+CMSS=142,"0544565034"
+CMSS: 72
OK
+CMTI: "SM",15
AT+CNMI=,2
OK
AT+CSDH=1
OK
AT+CMSS=142,"054565034"
+CMSS: 73
OK
April 15, 2008
Syntax
+CNMI? +CNMI:<mode>,<mt>,<bm>,<ds>,<bfr>
+CNMI=? +CNMI: (list of supported <mode>s), (list of supported <mt>s),
(list of supported <bm>s), (list of supported <ds>s), (list of
supported <bfr>s)
Table 3-49: +CNMI Parameters
0 Buffer unsolicited result codes (default).
3 Forward unsolicited result codes directly to the terminal
0 No SMS-DELIVER indications are routed to the terminal (default)
1 If SMS-DELIVER is stored in the G24-L, the memory location indication is
routed to the terminal using the unsolicited result code: +CMTI:
<mem>,<index>
2 SMS-DELIVER is routed directly to the terminal
Reserved for future implementation.
0 No SMS-STATUS-REPORT indications are routed to the terminal (default)
1 SMS-STATUS-REPORT is routed directly to the terminal
2 If SMS-STATUS-REPORT is stored in the G24-L, the memory location
indication is routed to the terminal using the unsolicited result code: +CDSI:
<mem>,<index>
0 No SMS-STATUS reports are buffered.
// send to myself
// send to myself
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
Response/Action
Description
3-83