Rs232 Lines Setup - Motorola AT Commands G24-L Developer's Manual

Recommended G24-L Initialization after Powerup

RS232 Lines Setup

There is no dynamic detection. Upon power up, the hardware is detected. If USB is detected, then
USB is selected. If USB is not connected, then the RS232 is selected. For a pin description, refer
to the G24-L Developer's Kit Manual: 6802984C10.
Figure 4-4: RS232 Lines Setup
4-4
Off
Check DSR Line
Activate DTR
Activate RTS
Off
G24-L AT Commands Reference Manual
Start
On
Check CTS
On
End
April 15, 2008