Figure 42 - Configuration Reboot Page; Figure 43 - Configuration Reboot Page - Ethernet Auto Negotiation Disabled - Motorola PTP 500 Series User Manual

Figure 43 - Configuration Reboot Page - Ethernet Auto Negotiation Disabled

This will be followed by a pop-up dialogue box asking to confirm the action.
NOTE
At this point you will lose connection to the unit. If you have just changed the IP
Address, you now have to reconnect to the unit using the address just set.
7.5.2.2 LAN Configuration Page for VLAN
The layout of the LAN Configuration page changes if this attribute is enabled in order to allow
the VLAN VID and VLAN Priority to be set, see Figure 44. The VLAN settings are applied only
after the unit is rebooted.
CAUTION
You must ensure that you can access the VLAN which you configure here, otherwise
you will be unable to access the unit following the next reboot.
The PTP 500 management function is only compatible with single VLAN tagged
packets. Any management packet with two or more packets will be ignored.

Figure 42 - Configuration Reboot Page

88
7 Web Page Reference