Installing A Transceiver Module (Optional); Installing An Xfp/Sfp+/Sfp Module - HP A10500 Series Installation Manual

Figure 19 Securing the power cable (vertical slot)
Figure 20 Securing the power cable (horizontal slot)

Installing a transceiver module (optional)

Installing an XFP/SFP+/SFP module

CAUTION:
To avoid component damage, read this section carefully before installing an XFP/SFP+/SFP module.
•
Do not remove the protection cover from the XFP/SFP+/SFP module before connecting an optical
•
fiber.
Remove the optical fiber, if any, from the XFP/SFP+/SFP module before installing it.
•
To install an XFP/SFP+/SFP module:
Wear an ESD-preventive wrist strap and make sure it makes good skin contact and is well
1.
grounded. For more information, see
Unpack the XFP/SFP+/SFP module. Do not touch the golden finger of the module.
2.
"Attaching an ESD-preventive wrist
21
strap."