Hitachi StarBoardLink EZ User Manual page 33

StarBoardLink EZ
[4] Wait a while. If the "LsCamWiz ERROR" message does not appear, sensor adjustment was
successful. If an error such as the following appears, click the "OK" button and then perform
adjustment again while referring to Section 2.3.6. If adjustment is still not successful, the
StarBoard unit may be defective.
[5] If adjustment was successful, click the "Exit" button.
* Note that just clicking the button does not complete the adjustment process.
[6] To save the adjustment result, click the "Yes" button.
This completes sensor adjustment.
2-14
Assembly and Setup
English