Connections
AC cord connection and ¿ xing, cable ¿ xing
Using the clamper
Secure any excess cables with clamper as required.
Note:
One clamper is supplied with this unit. In case of securing cables at four positions, please purchase it separately.
If you need more clampers, purchase them from your dealer. (Available from the customer service)
1
Attach the clamper
hole
Insert the clamper
in a hole.
10
AC cord ¿ xing
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.
To remove from the unit:
snaps
Keep pushing
both side snaps
Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet ¿ rst.
2
Bundle the cables
Set the
tip in the
hooks
hooks
Unplug the AC cord
To loosen:
Keep
pushing
knob
the knob