Picture Adjustments - Panasonic TH-80LFB70U Operating Instructions Manual

Picture Adjustments

1
2
Select to adjust each item.
Picture
Normalise Normal
Picture Mode
Backlight 100
Contrast
100
Brightness
Colour
Hue
Sharpness
White balance
Advanced settings
FRAME CREATION
Press to enter
Advanced settings.
Advanced settings
Enables ¿ ne picture adjustment at a professional
level (see next see page).
Advanced settings
Normalise Normal
Input level
Gamma
W/B High R
W/B High G
W/B High B
W/B Low R
W/B Low G
W/B Low B
FRAME CREATION
Improves motion picture quality by reducing motion blur.
Press the left or right button to switch between
modes.
Off Min
Helpful Hint (
While the "Picture" menu is displayed, if either the N button on the remote control is pressed at any time or the
ACTION ( ) button is pressed during "Normalise", then all adjustment values are returned to the factory settings.
Press to display the Picture menu.
Press to select the menu to adjust.
Select the desired level by looking at the picture behind the menu.
Note:
Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal,
input and menu setting.
Normal
50
50
50
5
Normal
Max
0
2.2
50
50
50
50
50
50
Mid Max
/ Normalise Normalisation)
Press " " or " " button to switch between modes.
Normal*
Cinema
Normal
For viewing in standard (evening lighting) environments.
This menu selects the normal levels of Brightness
and Contrast.
* In "ENGLISH (US)" OSD language, this is
displayed as "STANDARD".
Dynamic
For viewing in brighter environments.
This menu selects higher than normal levels of
Brightness and Contrast.
Cinema
For use in viewing tone-focused pictures with
brightness reduced.
Notes:
• If you would like to change the picture and colour of
the selected Picture menu to something else, adjust
using the items in the Picture menu. (see next page)
• In "ENGLISH (US)" OSD language, the "Picture
Mode" is displayed as "PICTURE MENU".
Press " " or " " button to switch between modes.
Normal (9300K) Cool (11500K)
• In "ENGLISH (US)" OSD language, the "White
balance" is displayed as "COLOR TEMP".
Notes:
• The mode is memorized per input terminal.
• Even if "Normalise" is selected, the Normal setting
will not be restored.
• The picture and menu will disappear for a moment
if you switch the mode to Off, or switch from Off to
another mode.
(except "FRAME CREATION")
Dynamic
Warm (6500K)
51