Function Button Settings - Panasonic TH-80LFB70U Operating Instructions Manual

Function Button Settings

Set the functions that operates when
Select "Function Button Settings" in "Setup" menu and
press button.
• Function Button 1, Function Button 2
The following functions are set to the FUNCTION button.
ECO Mode settings / Signal / On/Off Timer Settings / MULTI PIP Settings
The menu is displayed. (Example: ECO Mode settings)
ECO Mode settings
ECO Mode
Scrolling bar
Activates the "Scrolling bar only" screensaver.
After 15 minutes, the display enters standby mode.
INPUT (SLOT)* - INPUT (WHITEBOARD)
Simply press to select the input.
* "INPUT (SLOT)" is displayed when an optional Terminal Board is installed.
When a Terminal Board with dual input terminals is installed, "INPUT (SLOT A)" and "INPUT (SLOT B)" are
displayed.
Network Settings
"Network Settings" menu is displayed.
Note:
For the network function, refer to "Operating Instructions, Network Operations" and the instruction manual of "Wireless
Manager" in use.
AV Mute
Mutes the audio and video. To exit this mode, press any
button.
• Function Button Guide
The function display setting for the FUNCTION button is con¿ gured.
On: Press the FUNCTION button to display the function list of the button.
Off: The function list is not displayed.
Function
1:INPUT (WHITEBOARD) 2:INPUT (MEMORY VIEWER)
is pressed.
Power save
HDMI1 Power management
HDMI2 Power management
PC Power management
DVI-D Power management
No signal power off
Function Button Settings
Function Button 1
Function Button 2
Function Button Guide
Note:
Factory settings are as follows.
FUNCTION1 button: INPUT (WHITEBOARD)
FUNCTION2 button: INPUT (MEMORY VIEWER)
Custom
Off
Off
Off
Pressing the FUNCTION button clears the menu.
Off
Off
Disable
Multi-Live
Switch to the Multi-Live mode when using the
"Wireless Manager".
MULTI PIP
Press
The operation starts.
INPUT (WHITEBOARD)
INPUT (MEMORY VIEWER)
On
To exit this mode, press
to turn MULTI PIP On/Off.
button.
65