DVI-D IN connection
PC with DVI-D
video out
Installing the Ferrite core
1.
Pull back the tabs
(in two places)
DVI-D Input Connector
Pin Layouts
1
9
17
Connection port view
Notes:
• Additional equipment and cables shown are not supplied with this set.
• Use the DVI-D cable complying with the DVI standard. Image deterioration may occur depending on the length or
the quality of the cable.
Stereo mini plug (M3)
Less than
Ferrite core
1.97 inch (5 cm)
(supplied)
DVI-video cable (Within 5 m)
2.
Open the
Ferrite core
Pin No.
1
2
3
8
4
5
16
6
7
24
8
9
10
11
12
Less than
1.97 inch (5 cm)
3.
Route the
cable through
and close
Signal Name
T.M.D.S. data 2-
T.M.D.S. data 2+
T.M.D.S. data 2 shield
DDC clock
DDC data
T.M.D.S. data 1-
T.M.D.S. data 1+
T.M.D.S. data 1 shield
Connections
Shared with PC IN.
4.
Fix the Ferrite
core with the
cable tie
Pin No.
Signal Name
13
+5 V DC
14
Ground
15
Hot plug detect
16
T.M.D.S. data 0-
17
T.M.D.S. data 0+
18
T.M.D.S. data 0 shield
19
20
21
T.M.D.S. clock shield
22
T.M.D.S. clock+
23
T.M.D.S. clock-
24
13