Safety Features; Finger Guard; Emergency Stop Switch - Miele MM 50-175 Operating Instructions Manual

Finger guard

If fingers slip between the laundry feed in
table and the finger guard, the roller will stop
immediately and the heater plate will
withdraw.
To switch the ironer on again press the h
Start button.
,
The finger guard is a safety feature
which must be checked daily for proper
functioning before the machine is used.

Emergency stop switch

As soon as the emergency stop switch is
pushed in the roller stops and the heater
plate is withdrawn.
To reset the emergency stop switch after it
has been used, turn the ribbed disk
clockwise.
To switch the ironer on again press the h
Start button.
M.-Nr. 05 567 240 /03
On machines with an integrated
compressor the automatic pressure release
mechanism has to be re-set before switching
the machine on again if the compressor was
running when the emergency stop switch
was activated.
Releasing the pressure from the
compressor
First open the service panel in the right hand
side of the machine.
Press the black On/Off switch (next to the
pressure release coupling) in = OFF
and then pull it out = ON.
Close the service panel up again.

Safety features

9