Selecting Stations From The Preset Channel List; Tuning In Strong Signals - Pioneer DEH-P6800MP Operation Manual

C
Tuner )
' - - - -
- - - - - - ~
Section
C ) •
2 Press MULTI-CONTROL to turn 8SM on.
Searching is displayed. While Searching is
displayed, the six strongest broadcast frequen-
cies will be stored under preset tuning num-
bers 1-6 in the order of their signal strength.
When finished, the preset channel list ap-
pears.
• To cancel the storage process, press
MULTI-CONTROL.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
• You can also change the station by pushing
MULTI-CONTROL up or down.
_Note
Storing broadcast frequencies with BSM may reo
place broadcast frequencies you have saved
using buttons
1-6.
(!)
Selecting stations from the
preset channel list
The preset channel list lets you see the list of
preset stations and select one of them to re-
ceive.
1 Press LIST to switch to the preset chan-
nellist mode during the frequency display.
2 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
• You can also change the station by pushing
MULTI-CONTROL up or down.
• If
you do not operate the list within about 8
seconds, the preset channel list mode is can-
celed automatically.
_Notes
• You can also recall radio station frequencies
assigned to preset tuning numbers by push·
ing MULTI-CONTROL up or down during the
frequency display.
• You can also recall radio station frequencies
assigned to preset tuning numbers by press·
ing one of the preset tuning buttons
1-6
on
the remote control. (!)
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Use MULTI-CONTROL to select Local.
Local appears in the display.
2 Press MULTI-CONTROL to turn local
seek tuning on.
Local seek sensitivity (e.g.,
Level
2) appears in
the display.
• To turn local seek tuning off, press
MULTI-CONTROL again.
3 Push MULTI-CONTROL left or right to
set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: LeveI1--LeveI2--LeveI3--LeveI4
AM: Level 1--Level 2
The
Level
4 setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations. (!)
En
(ill