Pioneer DEH-P6800MP Operation Manual page 48

Section
. . (TV tuner
)
c~
)
Watching the television
You can use this unit to control a TV tuner,
which is sold separately,
For details concerning operation, refer to the
TV tuner's operation manual. This section pro-
vides information on TV operations with this
unit which differs from that described in the
TV tuner's operation manual.
CD
Band indicator
Shows which band the TV tuner is tuned to,
(1) Preset number indicator
Shows which preset has been selected,
CID
Channel indicator
Shows which channel the TV tuner is tuned,
1 Press SOURCE to select the TV.
Press
SOURCE
until you see
Television
dis-
played,
2 Press BAND to select a band.
Press
BAND
until the desired band is dis-
played,
TV-1 or TV-2,
3 To perform manual tuning, push
MULTI-CONTROL left or right.
The channels move up or down step by step,
@
En
4 To perform seek tuning, push and hold
MULTI-CONTROL left or right for about one
second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found,
• You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
• If you push and hold MULTI-CONTROL left or
right, you can skip broadcasting channels, Seek
tuning starts as soon as you release
MULTI-CONTROL.
C!J