Pioneer DEH-P6800MP Operation Manual page 47

( SIRIUS Satellite Radio tuner)
1 Use MULTI-CONTROL to select
FUNCTION.
Channel mode
appears on the display.
2 Press MULTI-CONTROL to select the de-
sired channel select setting.
Press
MULTI-CONTROL
repeatedly to switch
between the following channel select settings:
Channel number
(channel number select set-
ting)-Category (channel category select
setting)
• You can also select the SIRIUS channel select
setting by pressing and holding
CLOCK.
Selecting a channel in the
channel category
1 Select the channel select settings to
Category.
Refer to Selecting a channel in the channel
category on this page.
2 Push MULTI-CONTROL up or down to
select the desired channel category.
3 Push MULTI-CONTROL left or right to
select the desired channel in the selected
channel category.
C!J
Displaying the Radio 10
If you select
CH: 000,
the ID code is displayed.
• Push MULTI·CONTROL left or right to
select CH : 000.
o
Note
To select
CH : 000,
set the channel select setting
to
Channel number.
About the channel select
setting, refer to Selecting the SIRIUS channel se-
lect setting on the previous pageC!J
Section
( )GI
En
®