Scanning Tracks Of A Cd; Pausing Cd Playback; Using Compression And Bmx; Selecting The Search Method - Pioneer DEH-P6800MP Operation Manual

Section
D (
Built-in CD Player
) (~----~)
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Use MULTI-CONTROL to select
Scan mode.
Scan mode
appears in the display.
2 Press MULTI-CONTROL to turn scan play
on.
The first 10 seconds of each track is played.
3 When you find the desired track press
MULTI-CONTROL to turn scan playoff.
The track will continue to play.
• If the display has automatically returned to
the playback display, select
Scan mode
again by
using
MULTI-CONTROL.
gNote
After scanning of a CD is finished, normal play-
back of the tracks will begin again.
C!J
Pausing CD playback
Pause lets you temporarily stop playback of
the CD.
1 Use MULTI-CONTROL to select Pause.
Pause
appears in the display.
2 Press MULTI-CONTROL to turn pause
on.
Playback of the current track pauses.
• To turn pause off, press
MULTI-CONTROL
again.
C!J
®
En
Using compression and BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this player. Each of the functions has
a two-step adjustment. The COMP function
balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1 Use MULTI-CONTROL to select
Compression.
Compression
appears in the display.
2 Press MULTI-CONTROL to select your fa-
vorite setting.
Press
MULTI-CONTROL
repeatedly to switch
between the following settings:
COMP/BMX OFF-COMP 1-COMP
2-
COMP/BMX OFF-BMX 1-BMX 2
C!J
Selecting the search method
You can switch the search method between
fast forward/reverse and searching every 10
tracks.
1 Use MULTI-CONTROL to select
Search mode.
Search mode
appears in the display.
2 Press MULTI-CONTROL to select the
search method.
Press
MULTI-CONTROL
until the desired
search method appears in the display.
• FF/REV -
Fast forward and reverse
• Rough search -
Searching every 10
tracksC!J