Playing A Cd; Selecting A Track Directly - Pioneer DEH-P6800MP Operation Manual

Section
• (Multi-CD Player
)
C~ --")
Playing a CD
You can use this unit to control a multi-CD
player; which is sold separately.
These are the basic steps necessary to playa
CD with your multi-CD player. More advanced
CD operation is explained starting on the next
page.
CD
Disc number indicator
Shows the disc currently playing.
®
Track number indicator
Shows the track currently playing.
®
Play time indicator
Shows the elapsed playing time of the cur·
rent track.
1
Press SOURCE to select the multi-CD
player.
Press
SOURCE
until you see
Multi-CD
dis-
played.
2
Push MULTI-CONTROL up or down to
select a disc you want to listen to.
• You can also select a disc by using
1-6
but-
tons on the remote control.
• For discs 1 to 6, press the corresponding
button number.
• For discs 7 to 12, press and hold the corre-
sponding numbers, such as 1 for disc 7,
until the disc number appears in the dis-
play.
00
En
3 To perform fast forward or reverse,
push and hold MULTI-CONTROL left or
right.
4 To skip back or forward to another
track, push MULTI-CONTROL left or right.
Pushing
MULTI-CONTROL
right skips to the
start of the next track, Pushing
MULTI-CONTROL
left once skips to the start
of the current track. Pushing again will skip to
the previous track.
BNotes
• When the multi-CD player performs the pre-
paratory operations,
Ready
is displayed.
• If an error message such as
ERROR-11
is dis-
played, refer to the multi-CD player owner's
manual.
• If there are no discs in the multi-CD player ma-
gazine,
No Disc
is displayed.
• When you select a CD TEXT disc on a CD TEXT
compatible multi-CD player, the disc and track
titles automatically begin to scroll in the dis·
play. Ever Scroll function is ON at the initial
setting, the disc and track titles scroll continu-
ously. About Ever Scroll, refer to
Switching the
Ever Scroll
on page 63,0
Selecting a track directly
When using the remote control, you can select
a track directly by entering the desired track
number.
1 Press DIRECT.
Track number input display appears.
2 Press 0-9 buttons to enter the desired
track number.
• You can cancel the input number by pressing
CLEAR.