Air Filter Installation - D-Link DGS-6600 Series Hardware Installation Manual

DGS-6600 Layer 3 Chassis Ethernet Managed Switch Hardware Installation Guide

Air Filter Installation

On the back of the chassis on the edge of the right-side is a vertical slot where the air filter can be fitted. Slide in
a cleaned or new air filter into the slot, please see figure 2-5. Screw the two thumb-Phillips screws (see Figure 2-
5 diagram arrows) securing the air filter into the chassis. With the air filter installed screw two screws on the side
of the chassis as indicted by the vertical red arrows in the diagram figure 2-5.
Figure 2-8 Schematic diagram for installing the Air Filter
Figure 2-9 Schematic diagram for installing the Air Filter
44