Sanyo SHA TM64 AGB Instruction Manual page 15

Schedule Timer
STEP 4 Press the HOLIDAY button to enter the holiday.
The normal display returns.
To halt programmed operation for one week or more, you can disable all timer programs.
Once the timer has been disabled, programmed operations are not run until the below procedure is performed.
NOTE
During installation, the remote controller will be set to disable the timer for individual groups. In this state, the timer is disa-
bled only for the selected group, therefore press the GROUP button to confi rm which group is selected.
Hold down the T IMER OFF button for more than
2 seconds
3
appears on the display. The timer is
disabled from the next scheduled program.
.
To turn the timer back ON, hold down the TIMER
OFF button for more than 2 seconds
goes out and the timer is enabled
from the next scheduled program.
3-98