Using The Schedule Timer - Sanyo SHA TM64 AGB Instruction Manual

Schedule Timer
Display
A: Today's day of the week (
B: Program schedule indication (
C: Holiday schedule indication (
D: ERROR indication
E: Timer program
F: Group No.
G: (Disabled Feature) indication
3
H: TIMER OFF indication
I: Copy mode indication
J: Present time

Using the Schedule Timer

To use the schedule timer, follow the steps below.
STEP1 Turn ON power to the air conditioner.
Turn ON power to the air conditioner connected to the schedule timer. The schedule timer performs initial
communications with the indoor units, during which
NOTE
Do not turn off the power mains in heating and cooling seasons. (This keeps the crankcase heater electricity
turned on, which protects the compressor at startup.) If the air conditioner has been OFF for a long period of time,
turn on power 5 hours before starting operation.
STEP 2 Make the initial settings of the schedule timer.
Set the present time and today's day of the week. (Refer to page 3-88.)
STEP 3 Set up programs of the schedule timer.
Make settings for programmed operation. (Refer to page 3-100.)
C
A B
F
G
H
I
) Indicates today's day of the week.
) Appears under days that are scheduled for program operation.
Appears around scheduled holidays.
)
Displayed when a mistake is made during timer setting.
Displays set timer programs. Also, indicates the copy source/destination during
group program copying.
Up to 8 groups can be selected and displayed.
Displayed if the selected feature was disabled during installation.
Displayed when the timer has been turned OFF.
Displayed when copying a program into a group or day of the schedule.
Displays the present time on a 24-hour clock. Also, displays settings in the
various setting modes.
.
E
D
J
blinks on the display.