Sanyo SHA TM64 AGB Instruction Manual page 18

Schedule Timer
Power Outages
If the air conditioner is running when power is lost, the air conditioner remains OFF when power is restored. Also, if remote con-
troller operation was disabled when power was lost, it is enabled for a few minutes when power is restored.
Programmed operations scheduled for times that come after power is restored run as usual.
Program settings are retained in the non-volatile memory of the schedule timer, therefore they are not cleared in the event of
a power outage. Also, the present time and today's day of the week are retained for a maximum of 100 hours by the internal
battery.
Schedule timer settings (Example)
Operation when power is not lost
Air conditioner
operation
Remote controller
operation
Operation when power is lost at 15:00 and subsequently restored
Air conditioner
operation
Remote controller
operation
8:00
Stopped
Running
Enabled
*1
*1 Whether remote controller operation is enabled or disabled depends on the setting of the
previous day.
8:00
Stopped
Running
Enabled
*1
*1 Whether remote controller operation is enabled or disabled depends on the setting of the
previous day.
*2 Remote controller operation is enabled for a few minutes after power is restored.
12:00 13:00
Stopped
Running
Disabled
Power lost here.
15:00
12:00 13:00
Stopped
Running
Disabled
17:00 18:00 20:00
Stopped Stopped
Running
Enabled Disabled
17:00 18:00 20:00
Stopped Running Stopped
Disabled Enabled Disabled
*2
3