Brother RH-9820 Instruction Manual page 120

9. STANDARD ADJUSTMENTS
12. Route the tubes as shown in the illustration, and then connect the air hose (9) to the joint (4) and the air hose (10) to the
joint (5).
13. Secure the air hoses (9) and (10) in four places using the four bead bands (17) as shown in the illustration.
1172B
14. Loosen the socket bolt (18), and then remove the auxiliary clamp assembly (19).
15. Remove the spring (20).
16. Remove retaining ring C (21), and then remove the auxiliary clamp arm (22).
17. Remove retaining ring C (23), loosen the two set screws (24), and then remove clamp fulcrum shaft J (25) in the direction
of the arrow.
111
(Top)
RH-9820
Work clamp plate R assembly
(Viewed from the underside)
1171B