Using The Sewing Machine (Sewing Operation); Automatic Sewing (Automatic Mode) - Brother RH-9820 Instruction Manual

6. USING THE SEWING MACHINE (SEWING OPERATION)

6. USING THE SEWING MACHINE (SEWING OPERATION)
Turn off the power switch before carrying out the following operations.
If this is not done, the machine may operate if the start switch is pressed by mistake, which could result in serious
injury.
When replacing the needle
When not using the sewing machine and when leaving the sewing machine unattended
Do not touch any of the moving parts or press any objects against the sewing machine while sewing.
If this is not observed, it may result in personal injury or damage to the sewing machine.

6-1. Automatic sewing (automatic mode)

When carrying out automatic sewing for the first time, be sure to carry out a test sewing first.
In addition, if using the sewing machine when the ambient temperature is cold, carry out several test sewing operations to
allow the motor to warm up.
1
Switch the mode to automatic mode.
0430B
2
Select the desired program number (2).
0413B
3
Select the desired cutting operation (Cutting before sewing/No cutting/Cutting after sewing).
0432B
4
Place the material to be sewn under the work clamps, and then press the work clamp switch (5).
51
CAUTION
or
(1)
The sewing shape (1), program number (2), cutting operation (3) and
production counter (4) will appear in the display.
Independent program
(Refer to P. 39)
The program number (2) changes in the order shown in the illustration
each time the key is pressed. (The
opposite direction.)
* Refer to "5-5. Switching cutting operation" for details on switching
the cutting operation.
The work clamps will be lowered.
RH-9820
(3)
(2)
(4)
Cycle program
(Refer to P. 57)
(2)
key changes the order in the
0222B
0337B
0222B
0419B