Installing The Eye Guard; Installing The Dust Bag - Brother RH-9820 Instruction Manual

3-17. Installing the eye guard

Attach all safety devices before using the sewing machine.
If the machine is used without these devices attached, injury may result.

3-18. Installing the dust bag

1596B
1597B
1598B
CAUTION
0377B
1. Install the hook (1) underneath the table in a
convenient-to-use position.
2. Install the dust bag (2) to the hook (1).
3. Open the chuck of the dust bag (2) and insert the venturi
tube (3).
4. Close the chuck.
The longer the distance [A] from the bottom of the dust bag to
the venturi tube (3), the greater the amount of cutting scraps
that the dust bag can hold. To increase the amount of cutting
scraps that can be held, adjust so that the distance [A]
becomes longer.
Cut the knife trash tube (4) and air tube (5) shorter if
necessary.
* The efficiency for sucking in the cutting scraps will
increase if the knife trash tube (4) and air tube (5) are
made shorter.
NOTE:
Throw away the cutting scraps before they reach the tip
of the venturi tube (3). If they cover the tip of the venturi
tube, the inside of the knife trash tube (4) will become
blocked.
RH-9820
3. INSTALLATION
(1) Eye guard assembly
(2) Plain washers [2 pcs.]
(3) Screws [2 pcs.]
26