Kenwood CK 404 G Instructions For Use Manual page 36

Fig. 10.7
Fig. 10.8
Fig. 10.9
36
LEFT OVEN:
REPLACEMENT OF THE INJECTOR
OF THE OVEN AND GRILL BUR-
NERS
a) oven burner
•
•
•
•
b) grill burner
•
•
•
Fig. 10.10
Lift and remove the lower panel inside
the oven.
Remove the burner securing screw
(fig. 10.7).
Withdraw the burner as shown in fi-
gure 10.8 and rest it inside the oven.
Take care not to damage the wire to
the ignition electrode and the safety
valve probe.
Using a 7 mm box spanner, unscrew
the injector (indicated by the arrow in
fig. 10.8) and replace it by the proper
one according to the kind of gas. Then
replace the burner repeating the abo-
ve steps in reverse order.
Remove the burner by unscrewing the
front screw (fig. 10.9). Gently suspend
the burner as shown in figure 10.10.
Be careful not to damage the wire of
the electric ignition and the probe of
the safety valve.
Using a 7 mm box spanner, replace
the injector (indicated by the arrow in
fig. 10.10) by the proper one according
to the kind of gas.
Replace the burner repeating the abo-
ve steps in reverse order.