Figure 2-20 Example - Nat Traversal; Table 2-40 Example - Required System Settings; Table 2-41 Example - Required Ip Terminal Settings; Table 2-42 Example - Sv8100 System Router A Port Forwarding Settings - NEC Univerge SV8100 Features And Specifications Manual

Issue 11.0
With Version 6000 or higher software installed, the new NAPT feature is only effective when
Program15-05-45 is set "1" (On). Refer to
NAT Traversal network.
Required IP Terminal Settings on page 2-774
settings. Refer to Table 2-42 Example – SV8100 System Router A Port Forwarding Settings on page
2-775 for Port Forwarding setting examples.
 Actual input data should be set according to the required system.
Index
1
2
3
4
5
6
7
2 - 774
Figure 2-20 Example – NAT Traversal
Table 2-40 Example – Required System Settings
Figure 2-20 Example – NAT Traversal
Table 2-40 Example – Required System Settings
Program Default
10-12-03 0.0.0.0
10-12-07 0.0.0.0
10-12-09 172.16.0.10
10-12-10 255.255.0.0
10-46-14 0:OFF
15-05-45 0:OFF
84-26-01
172.16.0.20
Table 2-41 Example – Required IP Terminal Settings
Index Name
1 IP Address
2 Default Gateway
3 Subnet Mask
provide examples of required system and IP terminal
Input Data
172.16.0.254
10.1.1.1
172.16.0.10
255.255.0.0
1:ON
1:ON
172.16.0.20
0.0.0.0
0.0.0.0
0.0.0.0
UNIVERGE SV8100
or an examples of the
and Table 2-41 Example –
Remark
LAN IP address of Router A
WAN IP address of Router A
LAN IP address of VOIPDB
Subnet Mask of VOIPDB
NAT Mode
NAT RTP send port choice
(Version 6000 or higher required)
VOIP DSP IP Address
Default Input Data
172.17.0.100
172.17.0.254
255.255.0.0
IP Multiline Station (SIP)