NEC Univerge SV8100 Features And Specifications Manual page 883

UNIVERGE SV8100
Program
Program Name
Number
84-14-16 SIP Trunk Basic Information
Setup – SIP Trunk SIP-URI E.164
Incoming Mode
Operation
SIP Trunk E.164 Support:
To make a call using E.164 number format:
1. Lift the handset or press Speaker.
2. Dial 00441202223344
The system automatically modifies the required header fields of the SIP INVITE message using the configuration

settings in the table below before forwarding to the ITSP.
IP Trunk – (SIP) Session Initiation Protocol
Description/Comments
When this data is set to 1, then for
any inbound SIP calls that include
a + and a country code not defined
in Program 10-02-01, delete the +
and add the International Access
Code in Program 10-02-02. If the
country code is a match then
delete both the + and country code
but do not add the International
Access code.
When it is set to 2, then for any
inbound SIP calls that include a +
and a country code not defined in
Program 10-02-01, delete the +
and add the International Access
Code in Program 10-02-02. If the
country code is a match then
delete both the + and country code
and add the Caller ID Edit Code
from Program 10-02-03.
.
#
Assigned Data
1
0 = Disable
1 = Mode 1
2 = Mode 2
(default = 0)

Issue 11.0
Level
2 3
2 - 851