Table 2-44 Feature Support Table For Standard Sip Device - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
NAT or NAPT is only supported on the DT700 series phones. NAT or NAPT is not

supported on the ML440, MH240, the Wireless DECT (SIP), SP310 or third party SIP
phones.
Feature Name
Account Code Entry
Account Code – Forced/Verified/
Unverified
Alphanumeric Display
Automatic Release
Automatic Route Selection
Callback
Caller ID Caller Return
Caller ID
Call Forwarding
Call Forwarding – Centrex
Call Forwarding, Off-Premise
Call Transfer
Central Office Calls, Answering
Central Office Calls, Placing
Class of Service
Code Restriction
Code Restriction, Dial Block
IP Single Line Telephone (SIP)

Table 2-44 Feature Support Table for Standard SIP Device

Standard
SIP
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Comments
Depending on SIP device the account code may
have to be part of the dial string.
Some SIP devices have Alphanumeric Displays
and are backlit. However, the display is not
updated with CPU messages.
Caller ID Call Return is a SIP device feature not
a system feature.
Caller ID is shown only on ISDN, SIP or Analog
CO trunks that are directed at the SIP device.
Caller ID will not display for calls transferred to
the SIP device.
Can be programmed in 24-09-xx, through
feature code from administrator desk set and
from the SIP device using dial access codes. In
some cases Call Forwarding can be set on SIP
device itself but this not system side forwarding.
Can be programmed in 24-09-xx, through
feature code from administrator desk set and in
some cases from the SIP device using dial
access codes.
Only Announce/Supervised transfer is
supported.
Issue 11.0
2 - 807