NEC Univerge SV8100 Features And Specifications Manual page 481

UNIVERGE SV8100
Direct Call by Time Schedule:
Program
Program Name
Number
11-10-35 Service Code Setup (for
Administrator) – Dial-In Mode
Switching
12-04-01 Holiday Night Service Switching
15-07-01 Programmable Function Keys
20-07-26 Class of Service Options
(Administrator Level) – Dial-In
Mode Switch
22-02-01 Incoming Call Trunk Setup
22-11-02 DID Translation Number
Conversion – Target Number
Direct Inward Dialing (DID)
Description/Comments
Assign the service code Dial-In
Mode Switching.
Define a yearly schedule of
holiday night-switch settings. This
schedule is used for the setting of
special days when the company is
expected to be closed, such as a
national holiday.
Assign a function key for
one-touch access to the Dial-In
Mode Switching setup code (Code
88).
Enable/ Disable an extension user
ability to manually change Dial-In
Modes.
For each Night Service Mode,
enter service type 8 when the
trunk should be a DID (DDI) Mode
Switching trunk.
For each DID Translation Table
entry (1~2000), specify the
extension the system dials after
translation.
 Do not assign Received
Digits in Program 22-11-01
when using DID Call by Time
Schedule.
Assigned Data
1
MLT, SLT

(default not assigned)
Night Mode Service
Group No.
01-32
Days and Months
0101~1231
Time Pattern No.
0~10
0 = No Setting
(default not assigned)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
(Appearance
00 ~ 99
Function Code)
(Service Code 752 by
default)
0 = Off
1 = On

(default = 0 for
COS 1~15)
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID

4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Maximum 24 digits
(default not assigned)

Issue 11.0
Level
2 3

2 - 449