NEC Univerge SV8100 Features And Specifications Manual page 47

UNIVERGE SV8100
Program
Program Name
Number
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
20-13-20 Class of Service Options
(Supplementary Service) –
Account Code/Toll Restriction
Operator Alert (Restricted
Operation Transfer)
21-01-14 System Options for Outgoing
Calls – Forced Account Code
Inter-digit Timer
21-04-01 Toll Restriction Class for
Extensions
35-05-01 Account Code Setup – Account
Code Mode
35-05-02 Account Code Setup – Forced
Account Code Toll Call Setup
Account Code – Forced/Verified/Unverified
Description/Comments
Assign a function key as an
Account Code key (code 50). Use
this key instead of the dial pad to
enter the  before and after the
Account Code.
Assign a Class of Service (1~15)
to an extension.
Turn Off or On the Operator Alert
when a forced account code is
incorrectly entered.
The system waits this time for a
user to enter a Forced Account
code.
Assign a Toll Restriction Class
(1~15) to an extension.
For each Class of Service (1~15)
select the Account Code Mode.
Enable Account Codes for all calls
or just toll calls (for mode 2 or 3 in
Program 35-05-01).
Assigned Data
1
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for COS
01~15)
0~64800 (seconds)
(default = 3)
Day/Night Mode
1~9 (9 = Power Failure
Mode)
1~15
(default = 2)
0 = Account Codes
disabled (None)
1 = Account Codes
optional
2 = Account Codes

required but not
verified (No verify)
3 = Account Codes
required and verified
(Verify)
(default = 0)
0 = Account Codes for
toll and local calls (All)
1 = Account Codes just
for toll calls (STD)
(default = 0)
Issue 11.0
Level
2 3






2 - 15