NEC Univerge SV8100 Features And Specifications Manual page 832

Issue 11.0
Program
Program Name
Number
24-09-03 Call Forward Split Settings -
Intercom Call Forwarding
Destination for Both ring, All
Call, No Answer
24-09-04 Call Forward Split Settings – CO
Call Forwarding Busy
Destination
24-09-05 Call Forward Split Settings –
Intercom Call Forwarding Busy
Destination
24-09-06 Call Forward Split Settings – Call
Forwarding Destination for CTX/
PBX for All Call, No Answer
24-09-07 Call Forward Split Settings – Call
Forwarding Destination for CTX/
PBX for Busy
84-11-28 Dterm IP CODEC Information
Basic Setup – Audio Capability
Priority
84-26-01 IPL Basic Setup – IP Address
84-26-02 IPL Basic Setup – RTP Port
Number
2 - 800
Description/Comments
Assign Intercom Call Forwarding
Destination for ring, all call and no
answer.
Assign CO Call Forwarding for
busy destinations.
Assign Intercom Call Forwarding
for busy destinations.
Assign Call Forwarding for CTX/
PBX all call, no answer
destinations.
Assign Call Forwarding
destinations for busy CTX/PBX
calls.
Set voice (RTP packet) encoding
parameters.
The ML440 only supports G.711.
Assign the IP address for each
DSP on the IPLA/IPLB.
Assign the RTP port number to be
used for each DSP on the IPLA/
IPLB.
Only even numbered ports

are supported.
IP Multiline Station (SIP) – ML440 Cordless
UNIVERGE SV8100
Assigned Data
1
1~9, 0, #, , R, @
(Up to 24 digits)
(default not assigned))
1~9, 0, #, , R, @
(Up to 24 digits)
(default not assigned)
1~9, 0, #, , R, @
(Up to 24 digits)
(default not assigned)
1~9, 0, #, , R, @
(Up to 24 digits)
(default not assigned)
1~9, 0, #, , R, @
(Up to 24 digits)
(default not assigned)
0 = G.711_PT
2 = G.729_PT
(default = 0)
xxx.xxx.xxx.xxx
Defaults:
Slot 1 = 172.16.0.20
:

Slot 4 = 172.16.0.44
VoIP GW Number 1~8
172.16.0.20 ~
172.16.16.0.27
0~65534
Defaults:
VoIP GW1 = 10020
VoIP GW2 = 10052
VoIP GW3 = 10084
VoIP GW4 = 10116
VoIP GW5 = 10148
VoIP GW6 = 10180
VoIP GW7 = 10212
VoIP GW8 = 10244
Level
2 3






