Closing The System; Inside The System - Dell DL1000 Owner's Manual

Closing The System

1. Place the cover onto the chassis and offset it slightly toward the back of the system so that it aligns
with the notches and lays flush on the chassis.
2. Slide the cover toward the front of the chassis until it locks in position.
3. Rotate the latch release lock in a clockwise direction to secure the cover.
4. Reconnect the system to the electrical outlet and turn the system on, including any attached
peripherals.

Inside The System

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Figure 6. Inside the System
1. 3.5 inch (HDD0) hard-drive cage
3. cooling shroud
5. processor heat sink
7. PERC H310 card
9. cooling fans (3)
11. 3.5-inch (HDD1) hard-drive cage
13. control-panel board
2. power supply
4. DIMMs (4)
6. Dell PERC H310 card riser
8. PERC H310-card latch
10. chassis intrusion switch
12. cable-routing latch
25