Back-Panel Features And Indicators - Dell DL1000 Owner's Manual

Item Indicator, Button, or
Connector
10 USB connectors (2)
11 System service tag/
Information tag

Back-Panel Features And Indicators

Figure 2. Back-Panel Features and Indicators
Item Indicator, Button, or
Connector
1 Serial connector
2 Dell PERC H310 slot
3 Video connector
4 eSATA
5 USB connectors (2)
6 Ethernet connectors (2)
7 System status indicator
8 System identification
button
8
Icon Description
Allow you to connect USB devices to the system.
The ports are USB 2.0-compliant.
A slide-out label panel that allows you to record
system information such as Service Tag, NIC, MAC
address, and so on as per your need.
Icon Description
Allows you to connect a serial device to the
system.
Accommodates the Dell PERC H310 card.
Allows you to connect a VGA display to the
system.
Allows you to connect to an external storage
device for replication seeding.
NOTE: Do not connect a storage repository to
the eSATA connector.
Allow you to connect USB devices to the system.
The ports are USB 3.0-compliant.
Two integrated 10/100/1000 Mbps NIC
connectors.
Indicates the status of the system. Lights blue
during normal system operation. Lights amber
when the system needs attention due to a
problem.
The identification buttons on the front and back
panels can be used to locate a particular system
within a rack. When one of these buttons is
pressed, the system status indicator on the back
flashes until one of the buttons is pressed again.
Press to toggle the system ID on and off.